Show Storm-Control - Cisco Catalyst 2950 Command Reference Manual

show storm-control

show storm-control
Use the show storm-control user EXEC command to display the packet-storm control information. This
command also displays the action that the switch takes when the thresholds are reached.
Syntax Description interface-id
broadcast
history
multicast
unicast
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.1(6)EA2
Usage Guidelines If the variable interface-id is omitted, the show storm-control command displays storm-control settings
for all ports on the switch.
You can display broadcast, multicast, or unicast packet-storm information by using the corresponding
keyword. When no option is specified, the default is to display broadcast storm-control information.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 2950 Desktop Switch Command Reference
2-212
show storm-control [interface-id] [{broadcast | history | multicast | unicast }] [ | {begin | exclude
| include} expression]
(Optional) Port for which information is to be displayed.
(Optional) Display broadcast storm information.
(Optional) Display storm history on a per-port basis.
(Optional) Display multicast storm information.
(Optional) Display unicast storm information.
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced. It replaced the show port
storm-control command.
Chapter 2 Cisco IOS Commands
78-11381-05