Clear Ip Dhcp Snooping Database - Cisco Catalyst 3750 Command Reference Manual

clear ip dhcp snooping database

clear ip dhcp snooping database
Use the clear ip dhcp snooping database privileged EXEC command on the switch stack or on a
standalone switch to clear the DHCP binding database agent statistics.
This command is available only if your switch is running the enhanced multilayer image (EMI).
Syntax Description
statistics
Defaults No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(20)SE
Usage Guidelines
When you enter the clear ip dhcp snooping database statistics command, the switch does not update
the entries in the binding database and in the binding file before clearing the statistics.
Examples
This example shows how to clear the DHCP snooping binding database agent statistics:
Switch# clear ip dhcp snooping database statistics
You can verify that the statistics were cleared by entering the show ip dhcp snooping database
privileged EXEC command.
Related Commands Command
ip dhcp snooping
ip dhcp snooping database
show ip dhcp snooping binding
Catalyst 3750 Switch Command Reference
2-46
clear ip dhcp snooping database statistics
Clear the DHCP snooping binding database agent statistics.
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Description
Enables DHCP snooping on a VLAN.
Configures the DHCP snooping binding database agent or
the binding file.
Displays the status of DHCP snooping database agent.
78-16181-03