Stack-Mac Persistent Timer - Cisco WLC 5700 Series Command Reference Manual

stack-mac persistent timer

stack-mac persistent timer
To enable the persistent MAC address feature, use the stack-mac persistent timer command in global
configuration mode on the switch stack or on a standalone switch. To disable the persistent MAC address
feature, use the no form of this command.
stack-mac persistent timer [0| time-value]
no stack-mac persistent timer
Syntax Description
0
time-value
Command Default
Persistent MAC address is disabled. The MAC address of the stack is always that of the first .
Command Modes
Global configuration
Command History
Release
Cisco IOS XE 3.2SE
High Availability Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
32
(Optional) Time period in minutes before the stack MAC address changes to
that of the new . The range is 1 to 60 minutes.
Modification
This command was introduced.
High Availability Commands
OL-32317-01