D-Link xStack DGS-3420 Series Reference Manual page 1041

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To display the GVRP status of the switch:
DGS-3420-28SC:admin#show gvrp
Command: show gvrp
Global GVRP : Disabled
Join Time : 200 Milliseconds
Leave Time : 600 Milliseconds
LeaveAll Time : 10000 Milliseconds
NNI BPDU Address: dot1d
DGS-3420-28SC:admin#
32-16 config private_vlan
Description
A private VLAN is comprised of a primary VLAN, up to one isolated VLAN, and a number of
community VLANs. A private VLAN ID is presented by the VLAN ID of the primary VLAN. The
command used to associate or de-associate a secondary VLAN with a primary VLAN. A primary VLAN
is created via the command create vlan type private_vlan. A secondary VLAN is created via the
command create vlan type 1q_vlan. A secondary VLAN cannot be associated with multiple primary
VLANs. The untagged member port of the primary VLAN is named as the promiscuous port. The
tagged member port of the primary VLAN is named as the trunk port. A promiscuous port of a private
VLAN cannot be promiscuous port of other private VLANs. The primary VLAN member port cannot be
a secondary VLAN member at the same time, or vice versa. A secondary VLAN can only have the
untagged member port. The member port of a secondary VLAN cannot be member port of other
secondary VLAN at the same time. When a VLAN is associated with a primary VLAN as the
secondary VLAN, the promiscuous port of the primary VLAN will behave as the untagged member of
the secondary VLAN, and the trunk port of the primary VLAN will behave as the tagged member of the
secondary VLAN. A secondary VLAN cannot be specified with advertisement. Only the primary VLAN
can be configured as a layer 3 interface. The private VLAN member port cannot be configured with the
traffic segmentation function.
Format
config private_vlan [<vlan_name 32> | vid <vlanid 2-4094>] [add [isolated | community] |
remove] [<vlan_name 32> | vlanid <vidlist>]
Parameters
<vlan_name 32> - Specify the name of the private VLAN. The maximum length is 32 characters.
vid - Specify the VLAN ID of the private VLAN.
1036