Port Panel Of A Qfx5100-24Q-Aa Device; Figure 15: Port Panel Of A Qfx5100-24Q-Aa Switch - Juniper QFX5100 Hardware Manual

Port Panel of a QFX5100-24Q-AA Device

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
The port panel of the QFX5100-24Q-AA switch consists of 24 quad small-form factor
pluggable plus (QSFP+) 40-Gigabit Ethernet ports. Each QSFP+ socket can be configured
to support 40-Gigabit Ethernet or as a set of four independent 10-Gigabit Ethernet ports
using breakout cables (channelization mode). The QFX5100-24Q-AA can also be
configured to support 96 10-Gigabit Ethernet ports using breakout cables (channelization
mode) with 1280 Gbps output. Any of the 24 ports can be configured as either an uplink
port or an access port.
The expansion module bay of the QFX5100-24Q switch is located on the port panel. In
the expansion module bay, you can install a single double-wide expansion module
(QFX-PFA-4Q) or two single-wide optional expansion modules (QFX-EM-4Q and
EX4600-EM-8F, in any combination). When you install two single-wide expansion
modules, the slot on your left hand side is slot 1 (QIC0), and the slot on your right hand
side is slot 2 (QIC1).
The QFX-PFA-4Q module adds four QSFP+ ports to the chassis. The QFX-EM-4Q module
adds four QSFP+ ports to the chassis and the EX4600-EM-8F module adds eight
10-Gigabit SFP+ ports to the chassis. The QFX-EM-4Q ports can be configured as either
access ports or as uplinks ports, but only ports 0 and 2 can be channelized by using port
mode. The QFX-EM-4Q ports can also be configured as either access ports or uplink
ports, but only ports 0 and 2 can be channelized by using port mode.
shows the port panel of the QFX5100-24Q-AA device.

Figure 15: Port Panel of a QFX5100-24Q-AA Switch

1— Electrostatic discharge (ESD) terminal
2—QSFP+ ports (24)
For details on port LEDs, see
Field-Replaceable Units in a QFX5100 Device on page 12
Port Panel of a QFX5100-24Q Device on page 23
Port Panel of a QFX5100-48S Device on page 28
Port Panel of a QFX5100-96S Device on page 32
Access Port and Uplink Port LEDs on a QFX5100 Device on page 57
Installing and Removing QFX5100 Device Hardware Components on page 201
Chapter 2: Chassis Components and Descriptions
3— Expansion module bay (with a QFX-PFA-4Q
expansion module installed)
"Port Panel of a QFX5100-24Q Device" on page
Figure 13 on page 23
23.
27