Installing The T640 Mounting Hardware For An Open-Frame Rack; Figure 61: Installing The Mounting Hardware For A Four-Post Rack Or Cabinet - Juniper T640 Hardware Manual

Hide thumbs Also See for T640:

Table of Contents

T640 Core Router Hardware Guide

Documentation

Installing the T640 Mounting Hardware for an Open-Frame Rack

Figure 61: Installing the Mounting Hardware for a Four-Post Rack or

T640 Chassis Description on page 15

Verifying the T640 Router Parts Received on page 155

Installing the T640 Mounting Hardware for an Open-Frame Rack on page 162

T640 Site Preparation Checklist on page 117

Before installing the T640 router into an open-frame rack, you must first install the large

mounting shelf on the rack. If you are front-mounting the router, you must remove the

center-mounting brackets from the chassis. In an open-frame rack, center-mounting is

generally preferable to front-mounting because the more even distribution of weight

provides greater stability. The small mounting shelf and the spacer bars are not needed.

Table of Contents