Installing The Switch; Installing And Connecting An Ex4500 Switch - Juniper EX4500 Hardware Manual

CHAPTER 12

Installing the Switch

Installing and Connecting an EX4500 Switch

Copyright © 2017, Juniper Networks, Inc.
Installing and Connecting an EX4500 Switch on page 125
Mounting an EX4500 Switch on page 126
Mounting an EX4500 Switch on Two Posts in a Rack or Cabinet on page 126
Mounting an EX4500 Switch on Four Posts in a Rack or Cabinet on page 129
Mounting an EX4500 Switch in a Recessed Position in a Rack or Cabinet on page 132
Installing and Removing EX4500 Switch Hardware Components on page 132
To install and connect an EX4500 switch:
Follow instructions in "Unpacking an EX4500 Switch" on page
1.
Mount the switch by following instructions appropriate for your site:
2.
"Mounting an EX4500 Switch on Two Posts in a Rack or Cabinet" on page 126
the mounting brackets provided)
"Mounting an EX4500 Switch on Four Posts in a Rack or Cabinet" on page 129
the separately orderable four-post rack-mount kit)
Follow instructions in "Connecting Earth Ground to an EX Series Switch" on page
3.
Follow instructions for connecting power as appropriate for your site:
4.
Connecting AC Power to an EX4500 Switch on page 141
Perform initial configuration of the switch by following instructions in
5.
and Configuring an EX Series Switch (CLI Procedure)" on page 159
Configuring an EX Series Switch (J-Web Procedure)" on page
Set the switch's management options by following the appropriate instructions:
6.
Connecting a Device to a Network for Out-of-Band Management on page 149
Connecting a Device to a Management Console by Using an RJ-45 Connector on
page 150
121.
(using
(using
135.
"Connecting
or "Connecting and
162.
125