Installing The Switch; Installing And Connecting An Ex4300 Switch - Juniper EX4300 Hardware Manual

CHAPTER 11

Installing the Switch

Installing and Connecting an EX4300 Switch

Copyright © 2017, Juniper Networks, Inc.
Installing and Connecting an EX4300 Switch on page 165
Mounting an EX4300 Switch on page 166
Mounting an EX4300 Switch on Two Posts of a Rack or Cabinet on page 167
Mounting an EX4300 Switch on Four Posts of a Rack or Cabinet on page 169
Mounting an EX4300 Switch in a Recessed Position in a Rack or Cabinet on page 173
Mounting an EX4300 Switch on a Wall on page 173
Installing and Removing EX4300 Switch Hardware Components on page 176
To install and connect an EX4300 switch:
Follow instructions in "Unpacking an EX4300 Switch" on page
1.
Install a power supply if it is not preinstalled:
2.
Installing an AC Power Supply in an EX4300 Switch on page 233
Installing a DC Power Supply in an EX4300 Switch on page 236
Install a fan module if it is not preinstalled; see
3.
Switch" on page 229.
Mount the switch by following instructions appropriate for your site:
4.
"Mounting an EX4300 Switch on Two Posts of a Rack or Cabinet" on page 167
using the mounting brackets provided)
"Mounting an EX4300 Switch in a Recessed Position in a Rack or Cabinet" on page 173
(by using the 2-in.-recess front brackets from the separately orderable four-post
rack-mount kit)
"Mounting an EX4300 Switch on Four Posts of a Rack or Cabinet" on page 169
using the separately orderable four-post rack-mount kit)
"Mounting an EX4300 Switch on a Wall" on page 173
orderable wall-mount kit)
Follow instructions in "Connecting Earth Ground to an EX Series Switch" on page
5.
161.
"Installing a Fan Module in an EX4300
(by using the separately
(by
(by
179.
165