Table 66: T640 Base Ac Power Requirements; Table 67: Typical Ac Power Requirements For T640 Components - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide
438
per each three-phase delta AC power supply or 11,775 W per each three-phase wye AC
power supply.
If you do not plan to provision 11,765 W per each three-phase delta AC power supply or
11,775 W per each three-phase wye AC power supply, you can use the information in
Table 66 on page 438, Table 67 on page 438
calculate power consumption for various hardware configurations, input current from a
different source voltage, and thermal output, as shown in the following examples for an
AC-powered router.
Table 66 on page 438 lists the power requirements for various hardware components
when the router is operating under typical voltage conditions. For power requirements
for specific PICs, see the.
T640 Interface Module Reference

Table 66: T640 Base AC Power Requirements

Component
Base system, not including FPCs and PICs
(includes five SIBs, one host subsystem (T-CB and
600, 1600, or 2000 Routing Engine ), one SCG,
cooling system at normal speed, and craft
interface), and two AC power supplies

Table 67: Typical AC Power Requirements for T640 Components

Component
SIB: Standard SIB, standard SIB version B, or
T640-SIB
Enhanced II FPC1
Enhanced Scaling FPC1
FPC2 and Enhanced II FPC2
FPC3 and Enhanced II FPC3
Enhanced Scaling FPC3
T640 Enhanced Scaling FPC4
Host subsystem (600, 1600, or 2000 Routing
Engine and T-CB)
SCG
Redundant backup three-phase delta AC power
supply
and the T640 Interface Module Reference
Power Requirement (Watts)
954 W
Power Power Requirement
Requirement (Watts) with 85%
(Watts) Efficiency
38 W 44 W
163.2 W 192 W
340.8 W 401 W
163.2 W 192 W
326.4 W 384 W
437.28 W 514 W
393.6 W 463 W
124.8 W 147 W
9.6 W 11 W
Not 91 W
applicable
Copyright © 2013, Juniper Networks, Inc.
to