Protocol Vlan Group - Dell Networking 2024 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
VLAN Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to attach the VLAN ID "100" to the
protocol-based VLAN group "3."
console(config-vlan)#protocol group 3 100

protocol vlan group

Use the protocol vlan group command in Interface Configuration mode to
add the physical unit/slot/port interface to the protocol-based group
groupid
identified by . A group may have more than one interface associated
with it. Each interface and protocol combination can be associated with one
group only. If adding an interface to a group causes any conflicts with
protocols currently associated with the group, this command fails and the
interface(s) are not added to the group. Ensure that the referenced VLAN is
created prior to the creation of the protocol-based group except when GVRP
is expected to create the VLAN.
To remove the interface from this protocol-based VLAN group that is
groupid
identified by this , use the no form of this command.
If you select all, all ports are removed from this protocol group.
Syntax
groupid
protocol vlan group
groupid
no protocol vlan group
804
VLAN Commands