Show Ports Security Addresses - Dell Networking 2024 Reference Manual

Port Status
---- ------ ----------
1/0/1 Locked
1/0/2 Unlocked
1/0/3 Locked
The following table describes the fields in this example.
Field
Port
Status
Actions
Maximum
Trap
Frequency

show ports security addresses

Use the show ports security addresses command in Privileged EXEC mode to
display current dynamic addresses in locked ports.
Syntax
show ports security addresses {gigabitethernet
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
294
Address Table Commands
Action Maximum
-------- ------- -------
Discard 3
- 28
Discard 8
unit/slot/port
Trap Frequency
Enable 100
- -
Disable -
Description
The port number.
The status can be one of the following: Locked
or Unlocked.
Action on violations.
The maximum addresses that can be associated
on this port in Static Learning mode or in
Dynamic Learning mode.
Indicates if traps would be sent in case of
violation.
The minimum time between consecutive traps.
unit/slot/port
}
| port-channel