Show Ports Security Addresses - Dell PowerConnect 3524 Cli Reference Manual

1/e18 Disabled
1/e19 Disabled
1/e20 Disabled
1/e21 Disabled
1/e22 Disabled
Frequency: Minimum time in seconds between consecutive traps
Counter: Number of actions since last trap

show ports security addresses

The show ports security addresses Privileged EXEC mode command displays the current dynamic
addresses in locked ports.
Syntax
• show ports security addresses [ethernet interface | port-channel port-channel-number]
• interface — A valid Ethernet port.
port-channel-number — A valid port-channel number
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
122
Address Table Commands
Lock -
Lock -
Lock -
Lock -
Lock -
1 -
1 -
1 -
1 -
1 -
-
-
-
-
-