Show Logging Buffered; Clear Logging Buffered; Show Logging Hosts - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches

18.3.9 show logging buffered

This command displays buffered logging (system startup and system operation logs).
Format
Mode
Admin Status
Component Filter
Wrapping
Behavior
Log Count

18.3.10 clear logging buffered

This command clears the messages maintained in the system log.
Format
Mode

18.3.11 show logging hosts

This command displays all configured logging hosts.
Format
Mode
Host Index
Severity Level
Port
Host Status
18-26
show logging buffered
Privileged EXEC
The current state of the in-memory log.
The component(s) from which received messages are to be
logged to the in memory log. Either a single component id or
"all components" may be specified.
The behavior of the In Memory log when faced with a log
full situation.
The count of valid entries in the buffered log.
clear logging buffered
Privileged EXEC
show logging hosts
Privileged EXEC
(Used for deleting hosts)
The minimum severity to log to the specified address.
Displays the server port number, which is the port on the
local host from which syslog messages are sent.
The state of logging to configured syslog hosts. If the status is
disable, no logging occurs.
v1.0, October 2008
System Maintenance Commands