Logging Host Reconfigure; Show Logging Buffered; Show Logging Hosts - NETGEAR ProSAFE M7100-24X Reference Manual

ProSAFE M7100 Managed Switches
Term Definition
Log Messages Number of messages received by the log process. This includes messages that are dropped or
Received ignored.
Log Messages Number of messages that could not be processed due to error or lack of resources.
Dropped
Log Messages Number of messages sent to the collector/relay.
Relayed

logging host reconfigure

This command lets you reconfigure the IP address of a configured syslog host. You must enter the
logging host index and either the host IP address or the host name.
Format
logging host reconfigure <hostindex> {<hostaddress> | <hostname>}
Mode Privileged EXEC

show logging buffered

This command displays buffered logging (system startup and system operation logs).
Format
show logging buffered
Mode Privileged EXEC
Term Definition
Buffered Shows whether the In-Memory log is enabled or disabled.
(In-Memory)
Logging
Buffered Logging The behavior of the In Memory log when faced with a log full situation.
Wrapping
Behavior
Buffered Log The count of valid entries in the buffered log.
Count

show logging hosts

This command displays all configured logging hosts.
Format
show logging hosts
Mode Privileged EXEC
Utility Commands
392