Front Panel Stacking Commands; Show Stack-Port; Show Stack-Port Counters - NETGEAR ProSafe GSM7224P User Manual

Front Panel Stacking Commands

This section describes the commands you use to view and configure front panel stacking
information.
stack-port
This command sets front panel stacking per port to either stack or ethernet mode.
Default
stack
Format
stack-port <unit/slot/port> [{ethernet | stack}]
Mode
Stack Global Config

show stack-port

This command displays summary stack-port information for all interfaces.
Format
show stack-port
Mode
Privileged EXEC
Term Definition
QOS Mode
Front Panel Stacking QOS Mode for all Interfaces.
For Each Interface:
Term Definition
Unit
The unit number.
Interface
The slot and port numbers.
Configured Stack
Stack or Ethernet.
Mode
Running Stack
Stack or Ethernet.
Mode
Link Status
Status of the link.
Link Speed
Speed (Gbps) of the stack port link.

show stack-port counters

This command displays summary data counter information for all interfaces.
Format
show stack-port counters
Mode
Privileged EXEC
ProSafe Managed Switch
Stacking Commands
29