INSERT This button lets you insert an entry into the
database. You cannot insert an entry for a port
which uses AutoSelect VLAN Mode.
DELETE This button allows you to delete entries
from the database. You cannot delete an entry if it
is associated with a port which uses AutoSelect
VLAN Mode.
Searching the Switch Database
You can search the switch database in two ways:
by MAC address or port number.
By MAC Address
To locate the port number against which a particular
MAC address is entered in the SDB:
In the MAC Address field, type in the MAC address
1
you are trying to locate.
Select FIND. The port ID is displayed in the Port
2
Number field and the entry in the listbox is high-
lighted with an asterisk (*).
By Port
To locate the MAC addresses entered against a par-
ticular port ID in the SDB:
Clear the MAC Address field by moving into the
1
field and pressing the spacebar.
In the Port Number field, enter the port ID for which
2
you want MAC addresses displayed.
Select FIND. The listbox will show entries in the
3
database for that port only.
Setting Up the Switch Database (SDB)
Adding an Entry into the SDB
In the MAC Address field, type in the MAC address
1
of the device.
In the Port field, type in the port identifier for this
2
device.
Select whether the entry is permanent or not by
3
specifying Yes or No in the Permanent field.
Select INSERT.
4
Deleting an Entry from the SDB
In the listbox, highlight the entry you want to delete
1
and press [Return], or type the MAC address into
the MAC Address field.
Select DELETE.
2
Specifying that an Entry is Permanent
In the listbox, highlight the entry you want to make
1
permanent and press [Return], or type the MAC
address into the MAC Address field.
In the Permanent field, specify Yes.
2
Select INSERT.
3
4-19