Omron OMNUC G User Manual page 9

Do not place any flammable materials near the Servomotor, Servo Drive, or Regeneration
Resistor.
Doing so may result in fire.
Mount the Servomotor, Servo Drive, and Regeneration Resistor on metal or other non-
flammable materials.
Failure to do so may result in fire.
Do not frequently and repeatedly turn the main power supply ON and OFF.
Doing so may result in product failure.
Use the Servomotors and Servo Drives in a specified combination.
Using them incorrectly may result in fire or damage to the products.
Do not store or install the product in the following places. Doing so may result in fire, electric
shock, or damage to the product.
Locations subject to direct sunlight.
Locations subject to temperatures outside the specified range.
Locations subject to humidity outside the specified range.
Locations subject to condensation as the result of severe changes in temperature.
Locations subject to corrosive or flammable gases.
Locations subject to dust (especially iron dust) or salts.
Locations subject to exposure to water, oil, or chemicals.
Locations subject to shock or vibration.
Do not touch the Servo Drive radiator, Servo Drive regeneration resistor, or Servomotor
while the power is being supplied or soon after the power is turned OFF.
Doing so may result in burn injuries.
Storage and Transportation Precautions
Do not hold the product by the cables or motor shaft while transporting it.
Doing so may result in injury or malfunction.
Do not place any load exceeding the figure indicated on the product.
Doing so may result in injury or malfunction.
Use the motor eye-bolts only for transporting the Servomotor.
Using them for transporting the machinery may result in injury or malfunction.
WARNING
Caution
Caution
Precautions for Safe Use
7