Omron OMNUC G User Manual page 289

3. Switching to the Parameter Setting Display
Key
Display example
operation
pknk_krk0k0.k
1k6
4. Setting the Parameter Number
Key
Display example
operation
pknk_k k0k4.
1k6
5. Displaying the Parameter Setting
Key
Display example
operation
k k k k k0
0k4
6. Changing the Parameter Setting
The following operation is not required if you are only checking a parameter setting.
Key
Display example
operation
k k k k k3
0k4
k k k k k3
0k4
7. Returning to Parameter Setting Mode
The following operation is not required if you are only checking a parameter setting.
Key
Display example
operation
pknk_krk0k0.k
1k6
Press the key to go to the Parameter Setting Display.
Press the key to return to the Parameter Type Selection Display.
Set the number of the parameter to be set or checked.
Press the key to display the setting.
The selected parameter number appears in the sub window.
Use the keys to change the setting.
The decimal point will flash for the digit that can be set.
Press the key to save the new setting.
Press the key to return to Parameter Setting Mode.
5-26 User Parameters
Explanation
Explanation
Explanation
Explanation
Explanation
5
5-56