Omron OMNUC G User Manual page 291

6. Changing the Parameter Setting
The following operation is not required if you are only checking a parameter setting.
Key
Display example
operation
k1k0k0k0k0
0k0
Hk k k k k
0k0
k1k0k0k0k0
0k0
Hk k k k k
0k0
7. Returning to Parameter Setting Mode
The following operation is not required if you are only checking a parameter setting.
Key
Display example
operation
pknk_krk0k0.k
3k2
Use the keys to change the setting.
The decimal point will flash for the digit that can be set.
Press the key to save the new setting.
Press the key to return to Parameter Setting Mode.
5-26 User Parameters
Explanation
Explanation
5
5-58