Omron OMNUC G User Manual page 352

6-4 Setting the Mode
Servo Parameters
1. Displaying Parameter Setting Mode
Key
operation
2. Selecting the Parameter Type
Key
6
operation
3. Switching to the Parameter Setting Display
Key
operation
4. Setting the Parameter Number
Key
operation
6-21
Display example
The item set for the Default Display (Pn001) is displayed.
Press the
Uknk_k5kpkd
Press the
1k6kbkiktkp
Display example
skekrkUkokp
Press the
Display example
pknk_k k0k0.
Press the
Press the
skU
Display example
Use the
pknk_k k1k0
If the parameter number is large, the setting can be made more quickly by
using the
skU
flash for the digit that can be set.
Explanation
key to display Monitor Mode.
key to display Parameter Setting Mode.
Explanation
and keys to select the servo parameter.
Explanation
key to go to the Parameter Setting Display.
key to return to the Parameter Type Selection Display.
Explanation
, , and keys to set the parameter number.
key to change the digit that is being set. The decimal point will