Omron OMNUC G User Manual page 413

User parameters are set and checked on CX-Drive or the Parameter Unit (R88A-PR02G).
Parameter Tables
Pn
Parameter name Setting
No.
000 Reserved Do not change.
Selects the data to be displayed on the 7-segment
LED display on the front panel.
0
1
2
001 Default Display
3
4
5 to
32767
002 Reserved Do not change.
Explanation
Normal status ("--" Servo OFF, "00" Servo
ON)
Mechanical angle (0 to FF hex)
Electrical angle (0 to FF hex)
Cumulative count for MECHATROLINK-II
communication errors (0 to FF hex)
Rotary switch setting (node address)
loaded at startup, in decimal
Reserved (Do not set.)
9-1 Parameter Tables
Default Setting
Unit
Setting Range
1 --- --- ---
0 --- 0 to 4 A
0 --- --- ---
Set
value
9
9-2