Other Printing Problems - Ricoh AP204 Operator's Manual

Other Printing Problems

Status
The printer prints a message
indicating insufficient memory. enough memory to print a page.
Image is printed on the reverse The paper in the paper tray is upside down. Load paper
side of the paper.
Paper misfeeds occur frequently. Make sure you are removing misfed paper correctly.
It takes too much time to
resume printing.
Possible Causes, Descriptions, and Solutions
This message is printed when the printer does not have
The following are the actions you should take when you
encounter memory shortage problems. If these actions do
not solve the problem individually, try them in combina-
tion with each other. => P.108 "Low Memory"
1. Increase printer memory.
Install the optional memory unit to increase printer
memory capacity. => P.9 "Installing the Memory Unit"
2. Reduce resolution.
Use the printer driver to set resolution to 300dpi.
=> Help of the printer driver
=> "RICOH-SCRIPT 2 Operating Instructions"
3. Turn on "Image Memory".
Use the printer's "System Menu" to turn on "Image
Memory". => P.91 "Making Printer Settings with the
Operation Panel"
with the print side up.
Pull the misfed paper out of the printer and double-
check to make sure you are removing all the paper that
was misfed. => P.71 "Removing the Misfed Paper"
Paper is not loaded correctly in the paper tray. Remove
the paper from the tray and reload it correctly. => P.51
"Loading Paper in the Paper Tray"
Check if the paper tray is set correctly. If not, set it cor-
rectly.
You might use paper not supported by this printer. Use
the appropriate type of paper. => P.49 "Paper not sup-
ported by this printer"
The data is so large or complex that it takes time to
process it. If the Data In indicator is blinking, the data
processing is being done. Just wait until it resumes.
The Energy Saver mode might be enabled. In the Energy
Saver mode, it takes time for the machine to warm up.
Other Printing Problems
6
67