Network Statistical Information - Ricoh AP204 Operator's Manual

Appendix
Item Name
Result
Time
User
Address
Process
Print Start Time
Print End Time
6
Open Count
Eof Count
Data Size

Network Statistical Information

This section is about the information provided about the Network Interface
Board.
Detailed information about the words used to describe the status of the Network
Interface Board are described below.
• mshell : Use info command
Item Name
System elapsed time
Total printing time
Total open count
Current connection
count
Total connection count
76
Meaning
Communication result.
• OK
Indicates that the print job was completed correctly.
• NG
Indicates that the print job was not completed normally.
• Canceled
rcp, rsh or lpr print commands were stopped. A problem
occurred with the printing application. This message
doesn't appear when ftp or rprinter is used.
The time when the print request was received.
The user name, workstation name or address of the host
that sent the print job.
IP address.
The type of print command used.
The time the print job was started.
The time the print job was completed.
Reception number of file unit.
Number of bytes of received data.
P.70 "Status of Printer".
Meaning
The time that passed since the network interface board
started.
A total time spent in processing printing the data.
A total open (printing process) count that application re-
quired.
Number of job connecting with a network interface board
currently.
The total number of print jobs sent to the network interface
board.