Ricoh AP204 Operator's Manual page 226

When using rsh, rcp, ftp
Can't build data connection: "message"
cmd_name:Command not supported
command line too long
file_name:No such file or directory
filter data error
get log busy
lost connection
no more ftp execute
print requests full
printer busy
printer permission denied
Cannot establish a connection for data
transfer due to the displayed error. Check
the ftp of the workstation that requested
the print job, and start it again. When us-
ing ftp, this message remains only on the
system log information.
The remote shell command using cmd-
namd is not supported. You should use
only the print, stat, status, syslog, info,
and prnlog commands. You should access
the printer only with rsh and rcp remote
shell commands.
The command line is too long.
You must use a file name with the stat,
status, syslog, info, prnlog, and install
commands.
Some of the data cannot be handled by the
filter option. Confirm the file code and the
settings of the filter option.
Other machine is getting the log informa-
tion. You should get it afterwards.
The connection was cut by a counterpart.
Check the ftp of the workstation that re-
quested the print job, and start it again.
When using ftp, this message remains
only on the system log information.
More than 3 users cannot log in using ftp
at a time. Since there are 3 other users that
have already logged in, wait until the job
is finished.
Cannot accept the print request.(max. 5
sessions) Confirm the status of the printer
with lpq, rsh, rcp, and ftp commands, and
print it again after the number of print re-
quests (sessions) becomes less than 5.
Cannot get the printer information. An-
other user may be accessing it. Wait a few
minutes before trying again.
Cannot get a permission to use the print-
er. Confirm the access right with the ac-
cess control address and the access control
mask.
Message List
6
83