Ricoh AP204 Operator's Manual page 225

Appendix
No local target for "print server name"
Required file server ("file server name")
not found
Required print server ("print server
name") not found
Unable to attach to print server ("print
server name")
TCP/IP
When the address is configured
Invalid gateway address
6
When using lpr
filter data error
lost connection
print requests full
printer permission denied
printer refuse
At the beginning of the message, the IP address of the client is displayed with-
in parentheses.
82
Cannot get routing information on the file
server. If a different frame type is config-
ured from that used on the network, you
should select "Auto Select" as a frame
type.
Cannot find the required file server.
Cannot find the print server. Confirm the
name of the print server.
Cannot attach to the print server. The
print server refuses a connection for some
reason. Confirm the configuration of the
print server.
The Gateway address is not correct for the
specified IP address.
Some data cannot be handled by the filter
option. Confirm the file code and the set-
tings of the filter option.
The connection was cut by a counterpart.
Check the printer to which you requested
to print.
Cannot accept the print request.(max. 5
sessions) Confirm the status of the printer
with lpq, rsh, rcp, and ftp commands, and
print it again after the print request be-
comes less than 5 sessions.
Cannot get permission to use the printer.
Confirm the access rights with the access
control address and the access control
mask.
Something is wrong with your printer.
Confirm the status of the printer.