Introduction - Ricoh AP204 Operator's Manual

Introduction

This manual contains detailed instructions on configuring your printer for use
as a network printer. The actual procedures may differ depending on your net-
work environment. Use the procedures for your network environment.
Windows 95 / 98
Important
The procedures written in this manual assume that you are a network admin-
istrator. If you aren't, be sure to consult your network administrator before
configuration.
Reference
Refer to the manual that came with the printer for information on physically
installing the Network Interface Board and cabling.
Features
• Support for 100BASE-TX and 10BASE-T
• The Network Interface Board is compatible with NetWare (IPX/SPX),
Windows NT
and Macintosh (AppleTalk) protocols. This allows you to use the printer in
a network that uses different protocols and operating systems.
• A computer used as dedicated print server is not required, because the
Network Interface Board can be configured as a NetWare print server.
• The Network Interface Board can connect the printer to the network with-
out requiring its own power supply because the Network Interface Board
is installed inside the printer.
Windows NT (Server)
Windows NT
NetWare
(Client)
®
(TCP/IP), Windows
NetWare (Server)
Macintosh
UNIX
®
95/98 (TCP/IP) , UNIX (TCP/IP),
1