Laserwriter 8.3X Or Earlier - Ricoh AP204 Operator's Manual

C
Make sure that your printer is selected in the [Printer] box, make the printer
settings you want.
Note
Available settings for Paper Source are: [Auto Tray Select], [Tray 1] , [Tray 2]
(option).
Reference
If you use LaserWriter 8.3x or earlier, see P.39 "LaserWriter 8.3x or Earlier".
If you use LaserWriter 8.4x or later, see P.40 "LaserWriter 8.4x or Later".
D
After the settings are the way you want, click [Print].

LaserWriter 8.3x or Earlier

With the LaserWriter 8.3x or earlier driver, clicking [Options] on the [Printer] dia-
log displays the settings specific for this printer.
Reference
For more information on the LaserWriter 8.3x or earlier, see the documenta-
tion that comes with your Macintosh.
Clicking [Option] on the [Printer] dialog shows the following items:
• Auto Tray Switching
Turning on this setting tells the printer to automatically switch to the other
tray when it has the same size of paper as the current tray when paper runs
out while printing.
• Color Mode
Use this to set the output color to [Black & White] or [Color].
• Resolution
Use this to set the resolution to [300 dpi] or [600 dpi].
• Color Setting
Use this to set the correction method for the color conversion. The follow-
ing items are available: [Off], [Bright], [Super Bright], [Fine], [Super Fine].
• Color Profile
Use this to set the color rendering dictionary. The following items are
available: [Photograph], [Presentation], [Solid Color].
• Toner Saving
Use this to set Toner Saving on or off.
Note
Turning on toner saving can cause the output to become blurred and
result in very thin lines not printing at all. In the case of color printing,
toner saving can cause colors to be different than expected. Because of
Setting Up for Printing
39
3