Troubleshooting; Error & Status Messages; Printed Error Message - Ricoh AP204 Operator's Manual

Error & Status Messages
There are two types of error messages:

Printed error message

Displayed error message
The displayed error messages appear on the printer's panel display.
Printed Error Message
The error message shown below is output by the printer whenever there is not
enough memory to print your data.
Error Message
There is not enough memory in
your printer to print this page.
Change the resolution to 300 dpi
in the printer driver and try
again. For details, please refer to
the troubleshooting section in
your manual.

6. Troubleshooting

Required Action
The following are the actions you should take when you
encounter memory shortage problems. If these actions do
not solve the problem individually, try them in combina-
tion with each other. => P.108 "Low Memory"
1. Increase printer memory.
Install the optional memory unit to increase printer
memory capacity. => P.9 "Installing the Memory Unit"
2. Reduce resolution.
Use the printer driver to set resolution to 300dpi.
=> Help of the printer driver
=> "RICOH-SCRIPT 2 Operating Instructions"
3. Turn on "Image Memory".
Use the printer's "System Menu" to turn on "Image
Memory". => P.91 "Making Printer Settings with the
Operation Panel"
55