Ricoh AP204 Operator's Manual page 29

Installing Options
D
Insert the printer board into the
printer. Fasten both screws.
2
Important
Make sure that both screws are
used to secure the printer board.
Note
A coin can be used to fasten the
screws.
E
Plug the printer's power cord back
into the printer and the wall out-
let. Turn on the printer's power
switch.
F
Print a configuration page to con-
firm that the memory unit is prop-
erly installed.
Reference
=>P.101 "Printing the Configura-
tion Page"
Note
You can check if the memory unit
is installed properly by checking
the "Total Installed RAM" item
of the "Reference" on the con-
figuration page.
If the memory unit is not prop-
erly installed, repeat steps A-F
again. If you fail again, contact
your sales or service representa-
tive.
10
Important
To make the printer recognize
the installed option properly,
you must set up the option with
the printer driver. => P.36, 40, or
44 "Setting Up Options"
TPOP150E