Laserwriter 8.4X Or Later - Ricoh AP204 Operator's Manual

Using RICOH-SCRIPT2 with Macintosh
this, use toner saving only for proofing and intermediate drafts, but
turn it off for final prints when top quality is important.
• Dithering
Use this to specify the image mode. The following items are available: [Pho-
tographic], [Text].
• Paper Type
Use this to specify the paper type. The following items are available: [Plain
Paper], [Thick Paper], [OHP Transparency].
Note
Selecting [OHP Transparency] as the paper type automatically changes the
3
color profile to the OHP settings.
Note
Selecting [Printer's Default] means selecting the items set with the printer's op-
eration panel.
Reference
For more information on Color Setting, Color Profile, and Dithering, see P.51
"RPS2 Menu".

LaserWriter 8.4x or Later

The following describes the settings specific for this printer using LaserWriter
8.4x or later.
Reference
For more information on the LaserWriter 8.4x or later, see the documentation
that comes with your Macintosh.
Selecting [Color Matching] in the [Printer] dialog shows the following items:
• Print Color
You can specify the method and the color conversion settings for printing.
The following items are available.
[Black and White]
Select this for monochrome printing.
[Color/GrayScale]
If you select this item, the color profile you select in the [Color Profile] of the
[Printer Specific Options] becomes effective.
[ColorSync Color Matching]
If you select [ColorSync Color Matching], [Intent] and [Printer Profile] become
active in the same dialog. Select the ColorSync™ profile specific for your
printer. Your Macintosh converts the print data from RGB to CMYK data,
and sends it to the printer.
[PostScript Color Matching].
If you select [PostScript Color Matching], [Intent] and [Printer Profile] become
active in the same dialog. Select the ColorSync™ profile specific for your
40