Ricoh AP204 Operator's Manual page 258

If you select [Send TrueType fonts to printer according to the font Substitution Table],
you can edit the [Font Substitution Table]. Clicking [Edit the Table] on the [Fonts] tab
displays the [Font Substitution Table] dialog. You can use this dialog to specify
which TrueType fonts should be replaced with built-in printer fonts.
Using the [Font Substitution Table]
A Open the [Font Substitution Table] dialog.
B In the [For this TrueType font:] list in the upper part of the dialog, select the
TrueType font for which you want to specify a substitution font by clicking
it.
C Use the [Printer font for:] list box to select the printer font you want to spec-
ify.
D
Click [OK].
[Device Options] Tab
This tab includes settings that should be made after the printer driver is in-
stalled. These settings optimize the printer configuration.
Available printer memory
Shows the printer memory capacity as set by the [VMOption]. You normally do
not need to change this setting.
Printer features
Shows settings that are specific for your printer. These features can be
changed using the [Change settings for:] list box. The following is a list of avail-
able settings.
• Auto Tray Switch
Turning on this setting tells the printer to automatically switch to the other
tray when it has the same size of paper as the current tray when paper runs
out while printing.
• Color Mode
Use this to set the output color to [Black & White] or [Color].
• Color Setting
Use this to set the correction method used for the cover conversion. The
following items are available: [Off], [Bright], [Super Bright], [Fine], [Super
Fine].
• Color Profile
Use this to specify a color rendering dictionary. The following items are
available: [Photograph], [Presentation], [Solid Color].
• Toner Saving
Use this to set Toner Saving on or off.
Note
Turning on toner saving can cause the output to become blurred and
result in very thin lines not printing at all. In the case of color printing,
toner saving can cause colors to be different than expected. Because of
Using RICOH-SCRIPT2 with Windows 95/98
2
17