Ricoh AP204 Operator's Manual page 176

Note
If you use a currently defined print queue, proceed to the step L.
A In the [Available Options] menu, select [Print Queue Information].
B Press { { { { Insert} } } } and input a print queue name.
C Press { { { { Esc} } } } to return to the [Available Options] menu.
M
Create a printer as follows.
A In the [Available Options] menu, select [Print Server Information].
B To create a new print server, press { { { { Insert} } } } and input a print server name.
If you use an currently defined print server, select one of the print servers
shown in the [Print Server] list.
Important
Use the same name as that specified in the NIB Setup Tool. (Step H-A).
C In the [Print Server Information] menu, select [Print Server Configuration].
D In the [Print Server Configuration menu], select [Printer Configuration].
E Select the printer which is indicated as "Not Installed".
Important
Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step H-D)
F If you change the name of the printer, input a new name.
"Printer x" is assigned to the printer according to the number of the select-
ed printer.
G As Type, select [Remote Paralle, LPT1].
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H Press { { { { Esc} } } } , and click [Yes] in the confirmation dialog.
I Press { { { { Esc} } } } to return to the [Print Server Configuration Menu].
N
Assign print queues to the created printer as follows.
A In the [Print Server Configuration Menu], select [Queues Serviced By Printer].
B Select the printer created in the Step L L L L .
C Press { { { { Insert} } } } to select a queue serviced by the printer.
Note
You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the above steps, make sure that the queues are as-
signed.
O
Press { { { { Esc} } } } until "Exit?" appears, and Select [Yes] to exit PCONSOLE.
NetWare 3.x Configuration
3
33