Ricoh AP204 Operator's Manual page 268

Turning on this setting tells the printer to automatically switch to the other
tray when it has the same size of paper as the current tray when paper runs
out while printing.
• Color Mode
Use this to set the output color to [Black & White] or [Color].
• Color Setting
Use this to set the correction method for the color conversion. The follow-
ing items are available: [Off], [Bright], [Super Bright], [Fine], [Super Fine].
• Color Profile
Use this to set the color rendering dictionary. The following items are
available: [Photograph], [Presentation], [Solid Color].
• Toner Saving
Use this to set Toner Saving on or off.
Note
Turning on toner saving can cause the output to become blurred and
result in very thin lines not printing at all. In the case of color printing,
toner saving can cause colors to be different than expected. Because of
this, use toner saving only for proofing and intermediate drafts, but
turn it off for final prints when top quality is important.
• Dithering
Use this to specify the image mode. The following items are available: [Pho-
tographic], [Text].
• Paper Type
Use this to specify the paper type as [Plain Paper], [Thick Paper], or [OHP
Transparency].
Note
Selecting [OHP Transparency] as the paper type automatically changes the
color profile to the OHP settings.
Note
[Paper Size], [Orientation], [Paper Source], [Copy Count], and [Color Appearance]
settings are linked to the settings on the [Page Setup] tab.
Reference
For more information on the Color Setting, Color Profile, and Dithering, see
P.51 "RPS2 Menu".
Using RICOH-SCRIPT2 with Windows NT4.0
2
27