Ricoh AP204 Operator's Manual page 119

Making Printer Settings with the Operation Panel
7. Parallel 2
You can specify the optional parallel interface timing setting. Normally it is
not necessary to change this setting.
• ACK inside
• ACK outside
• STB down
Note
Do not use the "ACK outside" setting.
8. Bi-direction
You can specify the printer response mode for status fetch requests when the
standard parallel interface is being used. Use the "Standard" setting when
you are experiencing problems while the printer is connected to another
manufacturer's print box.
• Original Mode
• Standard
Note
This setting is effective only for "Parallel 1".
9. Printer Lang (Printer Language)
You can specify the printer language that is automatically set when the printer
is turned on.
7
• IPDL-C
• RPS
10. Language
You can specify the language of the text that appears on the panel display.
• English
• French
• German
• Italian
• Dutch
• Japanese
32. IP Address - 39. Active Protocol
These items appear when an optional network interface board is installed in
the printer.
Reference
=> P.23 "Configuring the Printer for the Network with the Operation Panel".
100