Windows Nt4.0 - Installing The Ipdl-C Printer Driver; Installing The Printer Driver - Ricoh AP204 Operator's Manual

Installing the IPDL-C Printer Driver
Windows NT4.0 - Installing the IPDL-C
Printer Driver
Preparation
Before starting installation, be sure to carefully read the README file that is
on the CD-ROM containing the printer driver.
Important
Never have two versions of the same printer driver installed on your system
at the same time. When upgrading to a new printer driver version, uninstall
the old version, and then install the new one.
Limitation
4
Printer driver installation requires full control access rights. To install the printer
driver, log on as an Administrators or Power Users group member.

Installing the Printer Driver

A
Click [Start], point to [Settings], and then click [Printers].
The [Printers] window appears.
B
Double-click the [Add Printer] icon.
The Add Printer Wizard appears.
C
After Confirming that [My Computer] option is selected, click [Next].
A dialog for specifying the port where the printer is connected appears.
D
Click a check box to select the port you want to use, and click [Next].
A dialog for the manufacturer and model of the printer appears.
E
Click [Have Disk...].
A dialog for driver installation from a disk appears.
F
Insert the CD-ROM that comes with the printer into your computer's CD-
ROM drive.
G
Change the drive name in the listbox to the name of the CD-ROM drive,
and then click [Browse...].
The Windows NT4.0 printer driver is on the following directory on the CD-
ROM:DRIVERS\IPDL_C\NT4.
H
Double-click [DRIVERS], [IPDL_C] and then [NT4]. Finally, click [Open].
I
Click [OK].
A printer model selection dialog appears.
42