Setting Up the Printer for Network with the Operation Panel
D
Select the protocol you want to use. You can select one of items on the table
below.
Menu item on the
panel display
All Active (Default)
None
TCP/IP Only
NetWare Only
3
TCP & NetWare
EtherTalk Only
TCP & EtherTalk
NetW & EtherTalk
TCP & NW & EtherTK
NetBEUI Only
TCP & NetBEUI
NetW & NetBEUI
TCP & NW & NB
ETalk & NetBEUI
TCP & ETK & NB
NW & ETK & NB
·
means that this protocol is active.
· Blank cell means that this protocol is not active.
· – means that this protocol is not supported.
*1: NetBEUI appears on the panel display, but is not supported.
Note
It is recommended that you should not select protocols that are not used on
your network.
Limitation
If you want to select EtherTalk, you should install the optional RICOH-SCRIPT
2 Type204.
24
Active Protocol
TCP/IP
NetWare
EtherTalk
NetBEUI *
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1