Ricoh AP204 Operator's Manual page 194

If the host name of the printer has already been configured, input nothing
and press {Return}. Nothing is added to the /etc/hosts file.
F
Input the host name of a printer.
Enter Printer host name :
pomelo
Note
The host name is added to the /etc/hosts file.
dress and Host Name to the /etc/hosts File"
If the IP address entered with procedure E, nothing is added to the /etc/
hosts file.
G
Configure the printer name.
It is configured as the name appearing in "default" when you press {Return}.
If you want to change this name, input a new name.
Note
The printer name is added to the /etc/printcap file.
try to the /etc/printcap file."
The host name that was saved in step F followed by "_prn" appears in "de-
fault". If no host name is entered with procedure F, "ricoh_prn" is dis-
played.
H
To set the print option, input "filetype=RPS", because you must use Post-
Script when printing from a UNIX workstation.
Enter remote printer name [default filetype=P01]:
filetype=RPS
hosts file is modified
#
Note
"filetype=RPS" can be shortened to "fil=RPS".
Use "filetype_RPS" or "fil_RPS" when using Solaris 2.6. in place of "file-
type=RPS".
Setup with installation shell script is finished.
Note
Print option is writen in "rp" capability of /etc/printcap file(
option is used when you print by lpr.
I
Make a test print to confirm that the settings are correct.
# lpr -Ppomelo_prn file_name
Installing with the Installation Shell Script
P.52 "Adding the IP Ad-
P.52 "Adding an En-
P.52). This
5
51