Windows Nt 4.0 - Ricoh AP204 Operator's Manual

Windows NT 4.0 Configuration
E
Click [Network], and click [Browse].
F
On the network tree, double-click the name of the computer used as the
print server.
The printers attached to the network are displayed.
G
Select the name of the printer you want to use by clicking it, and click [OK].
H
2
Click [OK].
I
Confirm that the port name is displayed in the [Print to the following port] box,
and click [OK].

Windows NT 4.0

Use the [Printers] window to set up the printer.
A
Click [Start], point to [Settings], and then click [Printers].
B
Double-click the [Add Printer] icon.
This launches the Add Printer Wizard.
C
Click [Network printer server], and click [Next >].
D
In the [Shared Printers] box, double-click the name of the computer used as a
print server.
The printers attached to the network are displayed.
E
Highlight the printer you want to use by clicking it, and click [OK].
Note
If the printer driver is not installed in the print server, a message appears.
If a driver has been installed on the client, click [OK], and follow the in-
structions on the screen.
There is a Windows NT 4.0 printer driver in the \DRIV-
ERS\IPDL_C\NT40 directory of the CD-ROM that comes with the printer.
F
Select whether you use this printer as the default printer, and click [Next >].
G
After installation is complete, click [Finish].
The icon of the newly installed printer appears in the [Printers] window.
20