Default Document Properties' Tabs And Their Settings - Ricoh AP204 Operator's Manual

Default Document Properties' Tabs and Their Settings

Limitation
Changing the settings in the [Printers] window requires full control access
rights. Log on as an Administrator or a Power Users group member.
Note
General users can change the settings in an application's [Print] dialog.
[Page Setup] Tab
Page Size
Shows the currently selected paper size. You can use the list box to select an-
other paper size if you want.
Note
All paper sizes that can be used with Windows NT4.0 are displayed, how-
ever, only the paper sizes supported by the printer can be selected.
Reference
For more information on paper sizes supported by this printer, see the
printer's "Operating Instructions".
Paper Source
Use this to specify the tray from which you want paper to be fed for printing.
The following items are available: [Automatically Select], [Tray 1], [Tray 2] (op-
tion).
Note
If you cannot select an option tray even though it is physically installed on
the printer, use [Installable Options] on the [Device Settings] tab to correctly
set up the option.
Copy Count
Use this to set the number of copies of a print job.
Important
With some applications, the number of copies specified with the applica-
tion takes priority over the number of copies specified with the printer
driver.
Orientation
Use this to specify how the document is positioned on the page. The follow-
ing settings are available: [Portrait], [Landscape], [Rotated].
Using RICOH-SCRIPT2 with Windows NT4.0
2
25