Message List; System Log Information - Ricoh AP204 Operator's Manual

Appendix

Message List

This is a list of messages recorded to the the printer's sytem log. The system log
can be viewed using the the syslog command.

System Log Information

You can use the following methods to view the system log.
• UNIX : Use the syslog parameter of rsh, rcp or ftp
tion of Printer".
• mshell : Use the syslog command
Message When the Network Interface Board Starts or Restarts.
RICOH NIC Ver.x.x.x
6
PRINTER SYSTEM "system name"
Ver.x.x.x
Attach FileServer="file server name"
Current Interface Speed:xxxMbps
Current IPX address
Frametype="frame type name"
NetBEUI Computer Name="computer
name"
Start httpd
Start npmpd for IPX
Start npmpd for TCP/IP
Start smbd direct print mode(NetBEUI)
Start snmpd Ver.2.0
Vendor= , Country= , Lang=
80
P.58 "Status Representa-
P.71 "System Log Information".
Version number of the Network Interface
Board.
System name and version of the printer.
Your Printer is attached to "file server
name" as the nearest server.
Shows the speed of the network (10 Mbps
or 100 Mbps).
You can print from a client on the Win-
dows network via the print server.
The "frame type name" is configured to be
used on NetWare.
The NetBEUI Computer Name is defined
as "computer name".
The npmpd for IPX protocol has been
started.
The npmpd for TCP/IP protocol has been
started.
You can print from a client on the Win-
dows network via the print server.
The SNMP agent of the displayed version
has been started.
.