Ricoh AP204 Operator's Manual page 282

printer. Your Macintosh prepares the color rendering dictionary (CRD)
based on the selected profile and attaches the CRD to the print data. The
print data is sent to the printer with the CRD. The printer converts the print
data from RGB to CMYK based on the attached CRD.
Selecting [Error Handling] in the [Printer] dialog shows the following item:
• If the cassette is out paper
You can use this setting to select auto tray switching, which tells the printer
to automatically switch to the other tray when it has the same size paper
as the current tray when paper runs out while printing.
Selecting [Printer Specific Option] in the [Printer] dialog shows the following items:
• Color Mode
Use this to set the output color to [Black & White] or [Color].
• Resolution
Use this to set the resolution to[300 dpi] or [600 dpi].
• Color Setting
Use this to specify the correction method for the color conversion. The fol-
lowing items are available: [Off], [Bright], [Super Bright], [Fine], [Super Fine].
• Color Profile
Use this to specify the color rendering dictionary. The following items are
available: [Photograph], [Presentation], [Solid Color].
Note
This setting becomes effective when [Color/GrayScale] is selected for the
[Printer Color].
shows the following items:"
• Toner Saving
Use this to set Toner Saving on or off.
Note
Turning on toner saving can cause the output to become blurred and
result in very thin lines not printing at all. In the case of color printing,
toner saving can cause colors to be different than expected. Because of
this, use toner saving only for proofing and intermediate drafts, but
turn it off for final prints when top quality is important.
• Dithering
Use this to specify the image mode. The following items are available: [Pho-
tographic], [Text].
• Paper Type
Use this to specify the paper type. The following items are available: [Plain
Paper], [Thick Paper], [OHP Transparency].
Note
Selecting [OHP Transparency] as the paper type automatically changes the
color profile to the OHP settings.
P.40 "Selecting [Color Matching] in the [Printer] dialog
Setting Up for Printing
41
3