Using Ricoh-Script2 With Windows 95/98; Installing The Printer Driver - Ricoh AP204 Operator's Manual

Using RICOH-SCRIPT2 with Windows

Using RICOH-SCRIPT2 with Windows 95/98

Installing the Printer Driver

For operation under Windows 95/98, you should install both the Windows 95/
98 PostScript printer driver and the PPD file.
2
Preparation
The following procedure describes installation when the printer is connected
to the computer via parallel interface.
Important
The Windows 95/98 operating system CD-ROM or diskettes are required for
installation.
Be sure to install the PPD file for Windows 95/98. Do not install the PPD file
for Windows NT4.0 accidently.
A
Close all applications that are currently running.
B
Click [Start], point to [Settings], and then click [Printers].
The [Printers] window opens.
C
Double-click the [Add Printers] icon.
The [Add Printer Wizard] starts up.
D
Click [Next].
E
Check [Local printer], and click [Next].
A dialog for selecting the printer manufacturer and model name appears.
F
Click [Have Disk].
A dialog for installing a driver from a disk appears.
G
Insert the CD-ROM that comes with the printer into your computer's CD-
ROM drive.
H
Click [Browse].
Note
The Windows 95/98 printer driver is on the following folder on the CD-
ROM: \DRIVERS\RPS2\WIN95_98\(language)
I
Use the [Drives:] list box to select the CD-ROM drive.
J
In the [Folders] box, double-click [DRIVERS], [RPS2], and then [WIN95_98].
Then double-click the folder of the appropriate language. Finally, click
[OK].
12