Using Ricoh-Script2 With Windows; Before Installing Ricoh-Script2 - Ricoh AP204 Operator's Manual

2. Using RICOH-SCRIPT2 with

Before Installing RICOH-SCRIPT2

Follow the steps below to use RICOH-SCRIPT2 with Windows operating sys-
tem.
A Install the printer driver.
Install the printer driver and PPD file. The printer driver and PPD file you
should install depend on the version of Windows operating system you are
using.
Reference
Windows 95/98
Windows NT4.0
B
Set up options.
Make the necessary settings for the options you have installed to your printer.
Reference
Windows 95/98
Windows NT4.0
C Specify if you use the TrueType fonts.
You can specify if you use the TrueType fonts replaced with the printer's res-
ident fonts for printing.
Reference
Windows 95/98
Windows NT4.0
P.12 "Installing the Printer Driver"
P.19 "Installing the Printer Driver"
P.13 "Setting Up Options"
P.21 "Setting Up Options"
P.16 " [Fonts] Tab"
P.23 " [Device Settings] Tab"
Windows
9