Ricoh AP204 Operator's Manual page 35

Installing Options
F
Insert the printer board into the
printer. Fasten both screws.
2
Important
Make sure that both screws are
used to secure the printer board.
Note
A coin can be used to fasten the
screws.
G
Attach the interface cable to the
parallel interface connector of the
printer. Secure the cable with the
metal fittings as shown in the il-
lustration.
H
Attach the other end of the inter-
face cable to the interface connec-
tor of the computer, and secure the
cable.
I
Plug the printer's power cord back
into the printer and the wall out-
let. Turn on the printer's power
switch.
16
J
Print a configuration page to con-
firm that the IEEE 1284 Parallel
Type 204 board is properly in-
stalled.
Reference
=> P.101 "Printing the Configu-
ration Page"
Note
You can check if the board is in-
stalled properly by checking the
"Option Interface" item of the
TPOP330E
"Reference" on the configuration
page.
If the board is not properly in-
stalled, repeat the above steps
again. If you fail again, contact
your sales or service representa-
tive.
TPOH370E