Ricoh AP204 Operator's Manual page 267

Using RICOH-SCRIPT2 with Windows
Color Appearance
Use this to set the output color. The following settings are available: [Gray
Scale], [Color].
[Advanced] Tab
The current setting appears in the lower part of the dialog by clicking a setting
item. Select the setting you want to make for the selected item.
2
Graphic
• Resolution
Use this to set the resolution to [300 dpi] or [600 dpi].
• Color Appearance
Use this to set the output color. The following settings are available: [Gray
Scale], [Color].
• TrueType Font
Use this to set the TrueType font printing method. Selecting [Substitute with
Device Font] causes TrueType fonts to be replaced with the printer's fonts in
accordance with the font substitution table.
PostScript Options
• Mirrored Output
Select this option to print a mirror image of your document by reversing
the horizontal coordinates.
• Negative Output
Select this option to print a negative image, which is produced by replac-
ing the three primary colors with their complementary colors, and by re-
versing black and white.
Note
Using the negative image printing to output a color image might pro-
duce unexpected results.
• Send CTRL-D Before Each Job and Send CTRL-D After Each Job
When the printer is connected to the network, select [No] for both [Send
CTRL-D Before Each Job] and [Send CTRL-D After Each Job]
When the printer is connected to your computer via parallel interface ca-
ble, select [Yes] both for [Send CTRL-D Before Each Job] and [Send CTRL-D Af-
ter Each Job].
• Halftone Color Adjustment
Use this to adjust the halftone settings.
Printer Features
• Auto Tray Switch
26