Windows 95/98 - Installing The Ipdl-C Printer Driver - Ricoh AP204 Operator's Manual

Installing the IPDL-C Printer Driver
Windows 95/98 - Installing the IPDL-C
Printer Driver
Preparation
Before starting installation, be sure to carefully read the README file that is
on the CD-ROM containing the printer driver.
Important
Never have two versions of the same printer driver installed on your system
at the same time. When upgrading to a new version of the printer driver, de-
lete the old version, and then install the new one.
Normally you can use plug and play to install the printer driver. If your system does
not support plug and play, add the printer from the [Printers] window.
4
Plug and Play
Plug and play automatically makes the required software settings whenever
it detects that a new peripheral device has been connected to the computer.
Plug and Play operates when the following conditions are present.
• The computer supports plug and play (see the computer's documentation
for details).
• The printer is connected to the computer by a bi-directional interface cable.
• Printer power is turned on first, and then the computer is turned on.
Printer Driver Installation Flow
Read the
README
file.
Turn on
the
printer.
30
Install the
driver in accor-
Turn on
dance with the
the
instructions
computer.
that appear on
your computer
screen.
If the [New Hardware Found] dialog appears.
P.32 "Plug and Play Installation 1"
If the [Device Driver Wizard] appears.
P.33 "Plug and Play Installation 2"
If Windows 95/98 starts normally.
P.34 "Installing the Printer Driver With-
out Using Plug and Play"