When Paper Is Not Fed Or Ejected Properly; Other Printing Problems - Ricoh P C311W User Manual

7. Troubleshooting

When Paper Is Not Fed or Ejected Properly

Problem
Prints fall behind the machine when
they are delivered.
Prints do not stack properly.
The printed paper is curled.

Other Printing Problems

Problem
The toner has run out and printing
has stopped.
184
Pull up the appropriate stop fence (forward fence for A4/
Letter, rear fence for Legal size prints). See page 13 "Guide to
Components".
• The paper being used may be damp. Use paper that has
been stored properly. See page 40 "Supported Paper".
• Pull up the appropriate stop fence (forward fence for
A4/Letter, rear fence for Legal size prints). See page 13
"Guide to Components".
• Select [Curl Prevented] in [Curl Prevention Mode] under
[System Settings].
• Load the paper upside down in the paper tray.
• If the paper curl is severe, retrieve prints from the output
tray more frequently.
• The paper being used may be damp. Use paper that has
been stored properly.
• Select [Curl Prevented] in [Curl Prevention Mode] under
[System Settings].
When the toner runs out, pressing the [Stop/Start] key allows
you to print a few more pages, but the print quality of those
pages may be lower.
Solution
Solution