Adjusting The Image Density - Ricoh AP204 Operator's Manual

I
Replace the wire brush to its origi-
nal position.
J
Close the top cover and front cover.
Press the center of the top cover
and front cover until they lock into
place.
K
Press the power switch to turn on
printer power.

Adjusting the Image Density

Changing the image density setting
might cause a deterioration of color
balance. We recommend that you nor-
mally leave image density at its fac-
tory default setting without changing
it.
The following procedure describes
how to change the magenta image
density. You can use the same proce-
dure to change the image density for
TPOH700E
the other toner colors as well.
Important
Image density settings should be
made from your application or the
printer driver whenever possible.
Note
After pressing a key, wait until the
display changes as described, until
you perform the next key operation.
A
Press the printer's power switch to
turn on power.
B
Press { { { { { Menu} } } } } .
TPOH250E
The following message appears on
the panel display.
Cleaning and Adjusting the Printer
Power On Line Data In
Reset
Error
Menu Escape
Media Enter
<Menu>
IPDL-C Menu
6
TPOS040E
U
T
77