Macintosh Configuration; Configuring Macintosh; Changing To Ethertalk - Ricoh AP204 Operator's Manual

4. Macintosh Configuration

Configuring Macintosh

This chapter explains how to configure a network printer in a Macintosh Ether-
talk environment. The actual procedures to configure a network printer are
slightly different depending on the version of the Mac OS. This chapter de-
scribes how to configure your printer for MacOS8. If you are using a different
version, refer to the manual that comes with your version of the Mac OS for more
information.
Basic Procedure

Changing to EtherTalk

Configuring the printer
Changing printer name
Changing zone
Limitation
To print from a Macintosh, the optional PostScript kit is required.
Changing to EtherTalk
Follow these steps to configure the Macintosh to use EtherTalk.
Reference
For information on installing the software required for EtherTalk, refer to the
Macintosh manuals.
A
Open [Control Panels], and double-click the [AppleTalk] icon.
B
Select "Ethernet" from the [Connect via] pop-up menu.
C
If you change zones, select a name from the [zone] pop-up menu.
D
Close the [AppleTalk] control panels.
E
Restart the Macintosh.
45