Setting Up The Printer Driver - Ricoh AP204 Operator's Manual

Windows 95/98 Configuration
Note
An example would be "D:\NETWORK\MDP\SETUP" when the drive
letter is "D".
F
1
After the [Welcome] dialog appears, click [Next >].
G
After the [Setup Complete] dialog appears, click [Yes, I want to restart my comput-
er now.], and click [Finish].
The computer restarts, and Multi Direct Print can now be used. If you select
"No", be sure to restart the computer manually before launching Multi Direct
Print for the first time.
Go to P.10 "Setting Up the Printer Driver" after the computer restarts.
Uninstalling the Multi Direct Print Application
A
Open [Control Panel], and double click the [Add/Remove Programs] icon.
B
With [Install/Uninstall] tab, select [Multi Direct Print] by clicking it, and click
[Add/Remove].
C
After a confirmation message appears, click [Yes].
UninstallShield removes all of the components of the Multi Direct Print ap-
plication.
D
When the uninstallation is complete, restart the computer.

Setting Up the Printer Driver

Using Multi Direct Print to print is not possible until the printer driver is in-
stalled and the correct port selected.
Preparation
The target printer must be turned on before starting the installation process.
A
Install the printer drivers.
If the printer drivers have already been installed, you can proceed to the next
step.
Reference
For more information, refer to the Operation Instructions of your printer.
Note
Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
In the [Printers] window, highlight the icon of the printer you want to use
by clicking it. On the [File] menu, click [Properties].
10